Built environment

A Gensler Quality Reviewer on Cement Board Specs and Compliance Requirements

By Emilia Novak

I'm of the opinion that most building facade failures are specification failures, not construction failures. And more often than not, they're caught too late.

I'm a Quality and Brand Compliance Manager at Gensler. Before any material spec reaches a client, I review it—roughly 200+ unique documents a year. In our Q1 2024 quality audit, 18% of first-round building panel submittals were missing at least one required compliance document. That's not a supplier bashing statistic. It's a prevention failure.

People often search for 'Gensler architect' and expect portfolio hits, not a lecture on cement board specifications. But behind every clean facade is a set of unglamorous choices: substrate, thickness, fire rating, climate data. And I've learned the hard way that checking those choices earlier is always cheaper than checking them later.

The Cost of Checking Late

Here's the thing: reviewing a cement board spec at 60% design takes about 15 minutes. Reviewing it after the board is ordered takes days—and sometimes a full resubmittal. Reviewing it after installation? That's the $22,000 mistake.

I remember one project where the contractor wanted to save money by switching from the specified fiber-cement board to a 'similar' budget board. It looked the same. The price was lower. But the spec file had no fire test data for the assembly in question. We ended up doing a field mock-up, which failed, and the replacement cost six figures. I'm not going to pretend all of that cost was due to one board—but the trigger was a fifteen-second substitution decision made to save $600. Saved $600, spent $42,000 on removal and replacement. Penny wise, pound foolish.

Compliance Documents Are Part of the Product

I hear suppliers say, 'The product is fine—it's the paperwork that's heavy.' I don't agree. In building, the documentation is part of the product. A cement board's specifications are not an appendix. They are the instructions for how the product will be judged by inspectors, insurers, and architects.

That's also why marketing claims matter. Per FTC Green Guides (ftc.gov), environmental claims like 'recyclable' must be substantiated. If a supplier calls their board 'eco-friendly' without documentation, I can't put that claim in front of a client. It creates a compliance risk for the building owner, not just the supplier.

So when I talk about building panels compliance requirements, I'm not talking about boxes to tick. I'm talking about a chain of evidence.

Here's what I mean by building panels compliance requirements:

  • Fire performance: assembly-specific test data, not just a generic material classification.
  • Moisture and mold: water absorption limits and the conditions under which the board was tested.
  • Structural limits: flexural strength, impact resistance, and acceptable substrates.
  • Claims consistency: what the supplier says in marketing versus what the test report actually shows.

Cement Board Specifications: The Details That Actually Matter

Ask a Gensler architect about cement board specifications and you get a list: thickness, width, edge profile, water absorption, flexural strength, fire rating. But the spec that gets missed is context.

A board can meet its own standard and still fail in a specific assembly. That's not a contradiction. It's why we don't just ask 'Is it compliant?' We ask 'Compliant for what?'

When a Gensler architect asks for cement board specifications, 'It meets ASTM C1186' is only a starting point. We need the test method, the assembly, the exposure. If you're a building panels supplier, that level of detail is your selling point.

I once had a spreadsheet tell me a cheaper panel was the numerically correct choice—same thickness, same flexural rating, lower price. My gut said the documentation was too vague. I asked for a sample and a third-party test report. The sample looked fine. The report took four weeks to arrive and was for a different product line. That was the answer.

What This Means for Suppliers

There's a reason people look up the Gensler company profile instead of just flipping through project photography. They want to know how a large design firm stays accountable. The answer includes a lot of unglamorous spec reviews. We're not a building panels supplier, and we don't sell cement board. But if we specify a material that fails, the owner sees it as our failure too.

If you're a building panels supplier, the fastest way to earn trust is to send the compliance narrative before anyone asks. Here's a better first email: 'Here is the ASTM C1186 test report, the assembly details, and the limits of where this board should be used.' That email answers 80 percent of the questions I would have asked anyway.

Is This Overkill? Sometimes

To be fair, I understand the pushback. For a simple interior partition, you don't need a 40-page compliance submittal. There's a reasonable middle ground. But the middle ground should be decided by the spec, not by default.

I get why people want to keep the process light. Budgets are real. However, the projects where I've seen the most expensive surprises are exactly the ones where someone said, 'We'll deal with it in the field.' Field corrections are the most expensive form of design development.

The Bottom Line

So here's my position, unchanged: Prevention is not the expensive part. The expensive part is pretending that cement board specifications can be fixed after they're on the wall.

Five minutes of verification beats five days of correction.

If you're specifying building panels, review the compliance document before you issue the construction set. If you're supplying them, send the full story without being asked. And if anyone tells you the paperwork can wait—I've seen that movie. It doesn't end well.

Emilia Novak
Emilia Novak

Emilia Novak is a flooring and architectural-surfaces analyst covering ceramic and porcelain tile, natural stone, resilient flooring, underlayments, countertops, adhesives, grout, and installation accessories. She uses ASTM C373 and ASTM C648 test evidence while comparing water absorption, breaking strength, slab flatness, substrate moisture, joint width, slip resistance, and installed tolerances. Her specification guides help architects, contractors, and buyers match surface systems to traffic, wet-area exposure, maintenance demands, and substrate conditions.