Built environment

Choosing a Design Firm vs. Going Direct: A Scenario Guide for Office and Residential Projects

By Akiko Fujimori

I'm the office administrator for a 400-person company. I manage facility-related purchasing—roughly $350,000 annually across 11 vendors. In 2023, I got pulled into researching design firms for an office refresh, and it turned out to be the steepest learning curve of my career in this role.

One thing I keep coming back to: there's no single "best" vendor for building or design work. What's right depends entirely on which scenario you're in. Below are the three I've settled on after two project cycles, and the ones I'm using again as we plan a possible office-to-residential conversion.

The three scenarios at a glance

  • Scenario A: Finish-level refresh. Carpet, paint, lighting, light partitions—no structural change.
  • Scenario B: Use-change conversion. Like office to residential. Structure changes, codes shift, material performance becomes the binding constraint.
  • Scenario C: New construction or brand-level rebuild. Usually involves a full integrated design firm at the Gensler tier.

Picking the wrong scenario is, in my experience, the most common form of waste. People run a Scenario C budget through a Scenario A project, or the reverse—bring a design firm into something that a general contractor and a material supplier could have handled.

Scenario A: finish-level refresh (skip the design firm)

If you're just replacing finishes, a design firm usually isn't worth it. From the quotes I've collected, having Gensler architects and their design team run even a preliminary research phase starts around $28,000 to $45,000. On a 12,000-square-foot refresh with no structural work, that money doesn't come back.

The better path: hire a general contractor, source materials directly. For non-structural use, furniture-grade plywood (dry interior areas) and OSB (wet backing or exterior sheathing) cover most of what you need. The key move is ordering direct from a plywood OEM or an OSB board supplier instead of a distributor. In our own comparisons, OEM direct versus retail landed around 25% lower—no, closer to 20%, I'm mixing it up with a different order run. Either way, the gap is real.

The "local is always faster" assumption comes from an era before modern logistics. Today, a well-organized remote supplier can beat a disorganized local one—at least on standard specs.

There's also a causation thing worth flagging: people assume expensive design firms produce better outcomes. Often it's the reverse. Complex, brand-sensitive projects earn the right to expensive design firms. The causality runs from "important" to "expensive," not from "expensive" to "good."

Scenario B: office-to-residential conversion (materials first, design second)

This is where most companies get the sequence wrong. Standard process says: hire the designer, get the drawings, then price materials. In practice, doing it the other way around saves more money and headaches.

The reason is that in use-change projects, the binding constraints are code and material performance—not the shape of the space. Cement board selection is the clearest example. For wholesale buyers, "how to choose cement board for wholesale" really comes down to a three-way split: standard cement board (dry interior partitions), moisture-resistant cement board (bathrooms, kitchens), or fiber cement board (exterior cladding and heavy-load areas). The cost per square foot from base-grade to high-performance grade can vary by three to four times.

If you spec the design first and then discover a material has to be upgraded, the whole drawing set often goes back to the drawing board. Flip the order: lock material specs and performance parameters, then let the designer work inside a fixed frame. Much less rework.

One more thing—review environmental claims on materials carefully. The FTC's Green Guides (16 CFR Part 260) require that claims like "recyclable" or "eco-friendly" be substantiated and conditioned on whether most consumers actually have access to recycling for that material. During material bids, if a supplier can't explain why their board qualifies as "green," that label usually doesn't hold up.

Scenario C: new build or brand-level rebuild (this is where Gensler-tier firms earn their fee)

At this scale, a design firm starts to make sense. Take Gensler as an example—per their Gensler company profile, they're a global integrated design firm covering architecture, interiors, and conversion work—and for projects where brand expression and cross-discipline coordination matter, that integration genuinely lowers the odds of something going wrong. They run over a thousand projects a year, which means they've seen more failure modes than most owners ever will.

Even here, though, material sourcing stays with the buyer. The design firm writes the spec; who buys it, through what channel, and how it gets verified on delivery—that's your problem. I've watched companies assume that hiring a top-tier firm means the material side handles itself. It doesn't. Design and materials are always two separate tracks.

How to figure out which scenario you're in

Don't judge by project budget size. Ask three questions:

  1. Does the structure change? If not, you're in Scenario A.
  2. Does the use change? If yes (e.g., office to residential), you're in Scenario B—and you should plan from the material side first.
  3. Is there brand or compliance significance? If yes, you're in Scenario C, and it's time to talk to an integrated design firm.

Get the first question wrong and nothing downstream saves you money.

Akiko Fujimori
Akiko Fujimori

Akiko Fujimori is a structural building-materials analyst covering sawn timber, structural composite lumber, plywood, OSB, masonry units, concrete products, reinforcing components, and metal building systems. She references ASTM D5456 and ASTM C90 within their material scopes while comparing bending strength, modulus of elasticity, compressive strength, density, moisture content, dimensional tolerance, connector capacity, and corrosion protection. Her evaluations help structural designers, fabricators, and procurement teams align declared properties, connection details, exposure conditions, and inspection evidence with project loads.