Built environment

Gensler and Building Materials: The FAQ I Wish I'd Had Before My First Project

By Emilia Novak

I've spent the last eight years handling procurement and vendor coordination on mid-size commercial and mixed-use projects. Architecture firms, material suppliers, contractors—the whole chain. I've made a lot of mistakes. Some were small. A few cost me serious money and a lot of embarrassment.

This FAQ is what I wish someone had handed me on day one. You'll find some basic company info here (like the kind of thing you'd read in a Gensler company profile), but more importantly, you'll find the mistakes I made so you don't have to repeat them.

Who is Gensler, and why should B2B clients care about their company profile?

Gensler is a global architecture, design, and planning firm founded in 1965. Their company profile lists roughly 6,000+ employees across 50+ offices worldwide. If you've worked on commercial office interiors in any major city, you've probably walked into a Gensler-designed space without knowing it.

But here's what I didn't understand early on: Gensler isn't just an architecture firm. Their scope covers architecture, interior design, brand strategy, and—more recently—adaptive reuse and conversion projects. That integrated approach matters when you're trying to keep a project cohesive from concept through construction documents.

That said—my experience is based on about 40 projects where Gensler was either the lead designer or a reference point for comparison. If you're working on something significantly smaller or in a niche sector, their approach might not map cleanly. I can't speak to how they operate on, say, a 10,000-square-foot renovation versus a 500,000-square-foot tower.

Do you really need a Gensler-level architect for your project?

Honestly, it depends on your project size and how much coordination you want to do yourself.

I once tried to save money by going with a smaller firm—not a bad firm, just less established. The design was fine. The problem was that we ended up doing a lot of the coordination work ourselves, and I didn't have the bandwidth. We missed a materials spec deadline that cascaded into a two-week delay. That mistake cost around $8,000 in holding costs and a very uncomfortable conversation with ownership.

Gensler and firms at that level bring process, project management muscle, and a portfolio of past projects you can reference. But if your project is straightforward, a strong regional firm may serve you better and save 30–40% on design fees. It's not about the logo. It's about whether you have the internal team to fill the gaps a smaller firm might leave.

One of my biggest regrets: not evaluating that tradeoff properly before committing to the cheaper option. I was focused on the design fee line item and ignored the coordination cost. That's a lesson I've paid for more than once.

Office-to-residential conversion—what changed and why it matters now

The fundamentals of adaptive reuse haven't changed. Buildings are still buildings, and physics is still physics. But since 2020, the economics have shifted significantly.

In 2019, converting a Class B office building to residential barely penciled out in most markets. By 2024, with office vacancies climbing and residential demand outpacing supply in many metros, it's become one of the most active development strategies. Gensler architects have been at the center of this—they've published frameworks for evaluating conversion feasibility that look at floor plate depth, natural light access, and plumbing stack placement.

What's different now is the approach. A building that looked impossible to convert in 2018 might be feasible today because we've gotten better at solving specific problems—interior daylighting, mechanical system retrofits, and code compliance for residential use. The technology and the regulatory environment have both evolved.

The question isn't whether conversion is possible. It's whether the numbers work for your specific building, in your specific market, right now. Don't assume because a project worked in Dallas in 2023 that it'll work in Denver in 2026.

How do I get an accurate OSB board wholesale cost without the back-and-forth nightmare?

The most frustrating part of OSB pricing: you get a quote, it looks reasonable, then the actual invoice is 15–20% higher because of freight, minimum order adjustments, or "current market rate" clauses buried in the terms.

Here's what I do now. I ask for three things in writing before any order:

  • Price per unit at the quoted quantity
  • Freight cost to my specific delivery address (not "estimated")
  • Validity window—how long is this price locked?

As of early 2025, OSB wholesale pricing for 7/16" sheathing was roughly $12–18 per sheet depending on region and volume. But that varies week to week, and I've seen it swing more than 20% in a single quarter. Get your quote in writing with a date stamp.

I still kick myself for a 2022 order where I didn't lock the freight. It was a $4,200 order that ended up costing $5,100 because fuel surcharges went up between quote and delivery. That $900 came straight out of my project budget, and there was nothing I could do about it.

What should I watch out for with cement board OEM suppliers?

Cement board is one of those products where the manufacturing process looks simple but the quality variables are significant. You're talking about density, moisture absorption, edge integrity, and how the board handles temperature changes during installation.

The biggest mistake I made: ordering a large batch from a cement board OEM without requesting a pre-production sample. The board density was lower than the spec sheet promised, which meant it absorbed more moisture and we had tile adhesion issues on about 200 panels. That was a $4,500 redo plus a week of downtime.

Now I always request three things before committing:

  1. A physical sample from the actual production line—not a "representative" sample
  2. Third-party test results for density and moisture absorption
  3. A reference project where I can verify real-world performance

Not every OEM will accommodate all three. The ones that do tend to be the ones worth working with. The ones that push back or offer excuses are telling you something.

Plywood supplier selection—what actually matters?

This one took me years to figure out. Price is the easiest thing to compare. It's also the least useful metric on its own.

What matters more:

  • Consistency. A plywood supplier whose product varies batch to batch will cost you more in waste than you save on unit price. I've learned to request batch test data before committing to a large order.
  • Certification claims. FSC, PEFC, CARB Phase 2—any of them. But verify they're actually certified, not just claiming it. I've caught two suppliers in five years who listed certifications they didn't hold.
  • Communication speed. A plywood supplier who takes three days to answer a question about moisture content is telling you something about how they'll handle a problem when it actually matters.

I've only worked with domestic and Southeast Asian suppliers. I can't speak to how these principles apply to South American or European sourcing—the supply chain dynamics are different enough that my experience might not translate.

What's the biggest mistake I made that I'd tell you to avoid?

Not writing things down.

Not the contracts—I'm talking about the small stuff. Verbal promises, rushed specs, "we'll figure it out later" agreements. Those are the things that bite you six weeks later when no one remembers the conversation the same way.

In 2021, I approved a material substitution during a call with a contractor. No email, no paper trail. Six weeks later, the installed material didn't match the spec and I had no documentation to back up the approval. We ate the cost. That's a $3,200 mistake I'm still mad about.

Now I write everything—everything—in a follow-up email within an hour of any call where a decision is made. Even if it's just "confirming our conversation: we agreed to X." It takes two minutes. It has saved me tens of thousands.

That last one isn't about materials or architects. It's about the process that keeps the rest on track. Simple as that.

Emilia Novak
Emilia Novak

Emilia Novak is a flooring and architectural-surfaces analyst covering ceramic and porcelain tile, natural stone, resilient flooring, underlayments, countertops, adhesives, grout, and installation accessories. She uses ASTM C373 and ASTM C648 test evidence while comparing water absorption, breaking strength, slab flatness, substrate moisture, joint width, slip resistance, and installed tolerances. Her specification guides help architects, contractors, and buyers match surface systems to traffic, wet-area exposure, maintenance demands, and substrate conditions.